Product ID:RAYBESTOS SILICONE BRAKE FLUID
MSDS Date:05/12/1988
FSC:9150
NIIN:00F014106
MSDS Number: BJTPN

Emergency Phone: (517) 496-5900

Info Phone: (517) 496-5900

Preparer: JACK L. SHENEBERGER

Cage: 5D028

Telephone: 517-496-6000/517-496-6315

Cage: 5D028

SILICONE

Fraction By Weight: 100%

ACGIH TLV: NONE

OIL

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE: IRRITATES W/REDNESS & SWELLING.
SKIN: MAY IRRITATE. INHALATION: IRRITATES RESPIRATORY PASSAGES.
INGESTION: DIGESTIVE DISCOMFORT.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES: IRRITATES SLIGHTLY W/REDNESS & SWELLING.
SKIN: MAY IRRITATE. INHALATION: IRRITATES RESPIRATORY PASSAGES.
INGESTION: DIGESTIVE DISCOMFORT.
Medical Cond Aggravated by Exposure:ALLERGIC CONDITIONS

First Aid:EYES: FLUSH W/WATER FOR 15 MINS. SKIN: WIPE OFF & FLUSH
W/WATER. INHALATION/INGESTION: NO FIRST AID SHOULD BE NEEDED.

Flash Point Method:OC
Flash Point:>300F
Extinguishing Media:WATER FOG, CO2, DRY CHEMICAL, FOAM
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS & FULL
PROTECTIVE CLOTHING.

Spill Release Procedures:USE ABSORBENT MATERIAL TO COLLECT & CONTAIN
FOR SALVAGE OR DISPOSAL.

Handling and Storage Precautions:USE REASONABLE CARE & CAUTION.

Respiratory Protection:NONE SHOULD BE NEEDED
Ventilation:MECHANICAL: RECOMMENDED. USE VENTILATION TO KEEP HANDLING AT ELEVATE OF TEMPERATURES.
Protective Gloves:PROTECTIVE
Eye Protection:SAFETY GLASSES
Other Protective Equipment:RUBBER, PLASTIC, APRONS, BOOTS, ETCS.
Work Hygienic Practices:REMOVE CONTAMINATED CLOTHING & SHOES BEFORE
REUSE.
Supplemental Safety and Health

Boiling Pt:B.P. Text:>300F
Vapor Pres:<5
Spec Gravity:0.95
Evaporation Rate & Reference:(ETHER = 1): <1
Solubility in Water:<0.1
Appearance and Odor:VERY LITTLE ODOR, LIUQUID, PURPLE ODOR.
Percent Volatiles by Volume:<5%

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIAL
Stability Condition to Avoid:TEMPERATURES >304F
Hazardous Decomposition Products:SILICON DIOXIDE, CO2, TRACES OF
INCOMPLETELY BURNED CARBON PRODUCTS, & TRACES OF FORMALDEHYDE

Waste Disposal Methods:DOW CORNING SUGGESTS THAT ALL LOCAL, STATE &
FEDERAL REGULATIONS CONCERNING HEALTH/POLLUTION BE REVIEWED TO
DETERMINE APPROVED DISPOSAL PROCEDURES.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.